====== UpdateConfig command ======

This command is generally sent by the gateway to one node to alter its config.

===== Structure =====

^ Name ^ DataType ^ Structure ^
| Features | word | Each bits indicate if the corresponding feature is activated or not. See table bellow |
| Pulse | word | 5 least significant bits indicates pin used for Hal 1, 5 next bits indicates pin used for Hal 2, 5 next bits indicates pin used for dry |
| Battery | word | 5 least significant bits indicates pin used to trigger measurement (Digital), 5 next bits indicate pinned to measure (Analog) |

==== Features ====

^ bit ^ feature name ^ Description ^
| 0 | Hal1 | Pulse counter base on HAL sensor |
| 1 | Hal2 | Pulse counter base on HAL sensor |
| 3 | Dry | Pulse counter based on dry contact |
| 4 | vIn | VIN voltage measurement |
| 5 | Env | Environment data like temperature, humidity, pressure, co, ... |